Experimental and numerical study of the dispersion of motor vehicle pollutants under idle condition

The aim of the work presented here is to study experimentally and numerically the dispersion characteristics of vehicular exhaust plume at an idle condition in an idealized and simplified environment. The gaseous and particulate concentrations in the exhaust plume of three idling motor vehicles were measured in an isolated environment under calm weather conditions. Despite the difference in the initial concentrations, the pollutants decayed exponentially in all directions.The CFD code PHOENICS 3.3, with the k–ε eddy dissipation sub-model, was used for the numerical simulation. The simulated results match very well with the experimental results close to the source of emission but decay to the ambient concentrations much slower. The effects of the initial emission concentration, exit velocity, exit direction and crosswind intensity have been investigated parametrically. The initial pollutant concentration will increase the local concentrations but the pattern of dispersion remains the same. The exit velocity will increase the momentum of the jet, resulting in a deeper penetration downstream. The exit angle has a stronger influence on pollutant dispersion than both initial pollutant concentration and exit velocity. When the exit angle is 15°, the pollutants tend to spread on the ground region. Crosswind shows a significant effect on the dispersion of the exhaust plume also. It will divert the plume to disperse in the same direction of the wind with limited penetration in the downstream direction.     

Multivariate statistical study of heavy metal enrichment in sediments of the Pearl River Estuary

The concentrations and chemical partitioning of heavy metals in the sediment cores of the Pearl River Estuary were studied. Based on Pearson correlation coefficients and principal component analysis results, Al was selected as the concentration normalizer for Pb, while Fe was used as the normalizing element for Co, Cu, Ni and Zn. In each profile, sections with metal concentrations exceeding the upper 95% prediction interval of the linear regression model were regarded as metal enrichment layers. The heavy metal accumulation mainly occurred at sites in the western shallow water areas and east channel, which reflected the hydraulic conditions and influence from riparian anthropogenic activities. Heavy metals in the enrichment sections were evaluated by a sequential extraction method for possible chemical forms in sediments. Since the residual, Fe/Mn oxides and organic/sulfide fractions were dominant geochemical phases in the enriched sections, the bioavailability of heavy metals in sediments was generally low. The 206Pb/207Pb ratios in the metal-enriched sediment sections also revealed the influence of anthropogenic sources. The spatial distribution of cumulative heavy metals in the sediments suggested that the Zn and Cu mainly originated from point sources, while the Pb probably came from non-point sources in the estuary.     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.     

On-road motor vehicle emissions and fuel consumption in urban driving conditions

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NOx, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Improving visitor management approaches for the changing preferences and behaviours of country park visitors in Hong Kong

This study identified the changing preferences of country park visitors in Hong Kong and the potential for such changes to have further negative impacts on the ecologically sensitive areas of country parks. A questionnaire was used to collect feedback from 644 country park visitors to understand their preferences and visitation patterns. To investigate visitors’ preferences and behaviours and to develop better visitor management strategies, the survey data were compared with studies conducted 20 years ago. The results showed that the most popular nature‐based activities of 20 years ago, namely, picnicking and barbecuing, have significantly declined in popularity, while other activities, namely, nature studies and nature photography, have surged in popularity in recent years. These changes in visitor preferences have directly increased the negative impacts of visitors on country parks as they dispersed away from the high intensity recreation zones to the ecological sensitive areas. This emerging group of country park visitors has not been fully considered in the existing approach to visitor management and may irreversibly impact the ecological value of country parks. In this study, visitor management in Hong Kong's country parks was reviewed based on these research findings, and potential improvements were suggested.     

Assessment of Pb uptake, translocation and immobilization in kenaf (Hibiscus cannabinus L.) for phytoremediation of sand tailings

The potential of kenaf (Hibiscus cannabinus L.) for phytoremediation of lead (Pb) on sand tailings was investigated.A pot experiment employing factorial design with two main effects of fertilizer and lead was conducted in a nursery using sand tailings from an ex-tin mine as the growing medium.Results showed that Pb was found in the root,stem,and seed capsule of kenaf but not in the leaf.Application of organic fertilizer promoted greater biomass yield as well as higher accumulation capacity of Pb.In Pb-spike...     

Effect of starvation on the energy budget of two Asian horseshoe crab species: <Emphasis Type="Italic">Tachypleus tridentatus</Emphasis> and <Emphasis Type="Italic">Carcinoscorpius rotundicauda</Emphasis> (Chelicerata: Xiphosura)

Energy budget is one of the most studied parameters in aquatic animals under environmental challenge. To examine how prolonged starvation would affect their energy budget, respiration rate (RR), ammonia excretion rate (ER), oxygen consumption to ammonia–nitrogen excretion (O:N) ratio and scope for growth (SfG) representing the balance between energy intake and metabolic output, two Asian horseshoe crab species, Tachypleus tridentatus and Carcinoscorpius rotundicauda, were investigated in two feeding regimes (fed and starved) over a period of 7 weeks. No significant effects of species and time course, as well as their interaction, on absorption efficiency were observed in the fed treatments. For both species, RR and ER of the starved treatments significantly decreased, while their O:N ratio significantly increased during the experiment. However, such values for the fed treatments remained relatively stable over the study period. A rapid reduction in SfG was only apparent in the first week of the starved treatments for both species; thereafter, their SfG remained relatively constant. In the fed treatments, SfG of T. tridentatus was significantly lower than that of C. rotundicauda throughout the experiment. In general, C. rotundicauda showed a greater decrease in SfG under starvation than T. tridentatus, suggesting that they may have a more competitive life-history strategy for adjusting to poor nutritional conditions.     

What have we known so far about microplastics in drinking water treatment? A timely review

• 23 available research articles on MPs in drinking water treatment are reviewed. • The effects of treatment conditions and MP properties on MP removal are discussed. • DWTPs with more steps generally are more effective in removing MPs. • Smaller MPs (e.g.,<10 μm) are more challenging in drinking water treatment. Microplastics (MPs) have been widely detected in drinking water sources and tap water, raising the concern of the effectiveness of drinking water treatment plants (DWTPs) in protecting the public from exposure to MPs through drinking water. We collected and analyzed the available research articles up to August 2021 on MPs in drinking water treatment (DWT), including laboratory- and full-scale studies. This article summarizes the major MP compositions (materials, sizes, shapes, and concentrations) in drinking water sources, and critically reviews the removal efficiency and impacts of MPs in various drinking water treatment processes. The discussed drinking water treatment processes include coagulation-flocculation (CF), membrane filtration, sand filtration, and granular activated carbon (GAC) filtration. Current DWT processes that are purposed for particle removal are generally effective in reducing MPs in water. Various influential factors to MP removal are discussed, such as coagulant type and dose, MP material, shape and size, and water quality. It is anticipated that better MP removal can be achieved by optimizing the treatment conditions. Moreover, the article framed the major challenges and future research directions on MPs and nanoplastics (NPs) in DWT.     

Database-driven models of the world's Large Marine Ecosystems

We present a new methodology for database-driven ecosystem model generation and apply the methodology to the world's 66 currently defined Large Marine Ecosystems. The method relies on a large number of spatial and temporal databases, including FishBase, SeaLifeBase, as well as several other databases developed notably as part of the Sea Around Us project. The models are formulated using the freely available Ecopath with Ecosim (EwE) modeling approach and software. We tune the models by fitting to available time series data, but recognize that the models represent only a first-generation of database-driven ecosystem models. We use the models to obtain a first estimate of fish biomass in the world's LMEs. The biggest hurdles at present to further model development and validation are insufficient time series trend information, and data on spatial fishing effort.     

Trace metal contents of the pacific oyster (Crassostrea gigas) purchased from markets in Hong Kong

Arsenic, cadmium, chromium, and copper concentrations of the Pacific oyster,Crassostrea gigas, purchased from four different markets were determined in this project. In general, gill tissue had the highest proportion of metal contents (34%–67%) when compared with other tissue parts (mantle, viscera, and adductor muscle), except for arsenic, which showed the highest level in adductor muscle (44%). Smaller oysters (longitudinal length of soft body part less than 6 cm) had higher metal levels than larger ones (longitudinal length of soft body part more than 6 cm), except copper. None of the four metals examined showed an obvious seasonal trend, although cadmium levels seemed to be higher in autumn and winter months. Arsenic, cadmium, and copper levels in oysters purchased from different markets and different months obtained in the present study were higher when compared with past reports. Cadmium levels, as high as 10.98 mg/kg (dry weight basis) have been obtained. This approaches the safety limit that may be hazardous to human health. Continual monitoring of cadmium and other trace metals of toxicological significance to man in Hong Kong seafood is recommended.